Fly This lens on Inspire 3

TT Artisan 50mm f0.95 APS-C (Leica Version) to DL Bayonet

This is to replace the stock bayonet on a Leica L mount version of the TT Artisan 50mm f0.95. This is an APS-C lens, but has close to full frame coverage, and is the brightest and lightest lens to fly. You can film in moonlight only with this lens on the Inspire 3.

This kit requires purchase of this lens. Lens depicted in photos not included.

INSRUCTIONS

1. Remove stock bayonet with electric screw driver

2. Use old screws, and push them into the 3d print, then drive them into the old screw holes. Make sure to line up the dot on the side of the print to the red dot on the lens for correct orientation.

3. Screw in screws evenly making sure no one side is tighter than the other. (think of tightening a wheel on a car)

4. Set focus on the ground, add gaffe tape to lens barrel to lock focus on subject or infinity.

Notes

• This lens requires a standard or XL counter weight kit.

• Flying this lens and counter weights will change the aerodynamics of the Inspire 3.

• Practice extreme caution when flying, as even breaking will take more time and distance than with normal lenses.

• When opened up at f0.95 this lens will show some achromatic abborations and color fringing. This is particularly notiacble when filmign city lights, as they will skew and bloom to one side in magenta or purple. You cand use a Hue VS Saturation curve in Davinci resolve to get rid of this in post, or stop down to f1.4 - f 2.0.

• This lens has very soft edges and light vignette when filming full frame. Super 35 yields much better results.

• Made from High Quality PETG (Wont deform in a hot car )

• 2 year warranty on all 3d Prints

• Free shipping USA only

• International shipping $10