High Quality PETG 3D Printed Lens Adapter

This is a DL Mount lens Adapter . This works along with the standard counter weight kit or XL counter weight kit to adapt and use the following lenses on the DJI Inspire 3 (lenses sold separately)

*These are specifically designed for i2 and i3, and NOT intended for R4D and may not fit correctly or fall off under rigorous use on the R4D.

What’s Included

(1) 3d Printed Adapter - Minolta MD (also known as Minolta SR) to DL

See the Minolta 250mm Lens in action

https://youtu.beWatch this video-6jtvsNsTq4

Lenses this Adapts:

Minolta Rokkor 250mm (Used on Ebay) - (weight 350g) - tested, verified flight

Minolta Rokkor 135mm f3.5 - tested, verified flight

Minolta Rokkor 90mm f4

Minolta Rokkor 85mm f2.0

Minolta Rokkor 85mm f1.7

Minolta Rokkor 58mm f1.4 - tested, verified flight

Minolta Rokkor 45mm f2.0 - tested, verified flight

Minolta Rokkor 35mm f1.7

Minolta Rokkor 35mm f1.8

Minolta Rokkor 35mm f2.8

Minolta Rokkor 35mm f4

Minolta Rokkor 24mm f2.8

Minolta Rokkor 21mm f2.8

Minolta Rokkor 17mm f4

Flight Characteristics

Flight characteristics are significantly modified with heavy lenses. Fly with extreme caution with this lens. Not only are you flying with more lens weight but also more counter weight. Fly very slow and avoid windy conditions or high altitudes (above 8,000ft). Some vibrations are to be expected at certain gimbal tilt angles or various climate conditions. Warmer, high altitude conditions increase propellor speed, thus increases wind vibration.

How this works

Step 1. Install lens on Inspire 3 along with the Counter Weight kit and appropriate weights.

Step 2. Set focus to infinity on the ground.

Step 3. Lock focus with a small piece of gaffe tape on the lens. You will not get Autofocus with these lenses.

Step 4. Make sure gimbal lens lock has locked in lens correctly.

Counter weight kit needed to fly

• You will need the Standard or XL Counter Weight Kit

• amounts of weights vary with different lenses.

• Balls of steel

DISCLAIMER - YOU FLY AT YOUR OWN RISK

The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and bigger lenses will change flight and gimbal characteristics. By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics. This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.