High Quality PETG 3D Printed Lens Adapter

This is a DJI DL Mount lens bayonet to replace the stock bayonet. This works along with the standard counter weight kit or XL counter weight kit to adapt and use the following lenses on the DJI Inspire 3 (lenses sold separately)

What’s Included

(1) Replacement bayonet for a (Sony version Laowa 9mm f5.6 Lens) Standard

Lenses this Adapts:

Laowa 9mm f5.6 - Sony version (weight 350g)

Flight Characteristics

Flight characteristics are significantly modified with heavy lenses. Fly with extreme caution with this lens. Not only are you flying with more lens weight but also more counter weight. Fly very slow and avoid windy conditions or high altitudes (above 8,000ft). Some vibrations are to be expected at certain gimbal tilt angles or various climate conditions. Warmer, high altitude conditions increase propellor speed, thus increases wind vibration.

How this works

Step 1. Unscrew stock bayonet on lens with a small electronics screw driver

Step 2. Use the same screws and insert the 3d printed bayonet, aligning the bayonet in the correct orientation (Align mark to red dot on lens)

Step 3. Install lens on Inspire 3 along with the Counter Weight kit and appropriate weights.

Step 4. Set focus to infinity on the ground.

Step 5. Lock focus with a small piece of gaffe tape on the lens. You will not get Autofocus with these lenses.

Step 6. Make sure gimbal lens lock has locked in lens correctly.

Counter weight kit needed to fly

• You will need the Standard or XL Counter Weight Kit

• 4 singles on rear plate, 3 minis on the roll arm, and 2 singles on the rear Pan Arm. (Included in both kits)

• Balls of steel

DISCLAIMER - YOU FLY AT YOUR OWN RISK

The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and bigger lenses will change flight and gimbal characteristics. By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics. This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.