High Quality PETG 3D Printed Lens Adapter

This is a DJI DL Mount lens bayonet to replace the stock bayonet.

What’s Included

(1) Replacement bayonet for a Laowa 4mm f2.8 - L mount version (does not include lens)

• Only works with L mount version.

Lenses this Adapts:

Laowa 4mm f2.8 - L mount version (this is a APS-C lens and will not provide full sensor coverage)

• Provides greater than 180 degree coverage (210 degree).

Flight Characteristics

Flight characteristics are significantly modified with heavy lenses. Fly with extreme caution with this lens. Not only are you flying with more lens weight but also more counter weight. Fly very slow and avoid windy conditions or high altitudes (above 8,000ft). Some vibrations are to be expected at certain gimbal tilt angles or various climate conditions. Warmer, high altitude conditions increase propellor speed, thus increases wind vibration.

How this works

Step 1. Unscrew stock bayonet on lens with a small electronics screw driver

Step 2. Use the same screws and insert the 3d printed bayonet, aligning the bayonet in the correct orientation (Align mark to red dot on lens)

Step 3. Install lens on Inspire 3 along with the Counter Weight kit and appropriate weights.

Step 4. Set focus to infinity on the ground.

Step 5. Lock focus with a small piece of gaffe tape on the lens. You will not get Autofocus with these lenses.

Step 6. Make sure gimbal lens lock has locked in lens correctly.

Counter weight kit needed to fly

• For this lens you do not need a counter weight kit. You do need tungsten putty and add it to the bottom front housing of the lens to add more weight. Tungsten putty can be purchased separately here

DISCLAIMER - YOU FLY AT YOUR OWN RISK

The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and bigger lenses will change flight and gimbal characteristics. By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics. This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.