Nikon F to DL - Lens Adapter for Inspire 3
Nikon F to DL - Lens Adapter for Inspire 3
High Quality PETG 3D Printed Lens Adapter
This is a DL Mount lens Adapter . This works along with the standard counter weight kit or XL counter weight kit to adapt and use the following lenses on the DJI Inspire 3 (lenses sold separately)
What’s Included
(1) 3d Printed Adapter - Nikon F to DL
Lenses this Adapts:
Nikon 100mm f 2.8 - (used on ebay ) tested, verified flight
NIkon AIS 135mm f 2.8 (used on ebay ) Tested, very challenging lens to balance and fly vibration free, but still possible.
How this works
Step 1. Install lens on Inspire 3 along with the Counter Weight kit and appropriate weights.
Step 2. USet focus to infinity on the ground.
Step 3. Lock focus with a small piece of gaffe tape on the lens. You will not get Autofocus with these lenses.
Step 4. Make sure gimbal lens lock has locked in lens correctly.
Counter weight kit needed to fly
You will need the Standard or XL Counter Weight Kit
amounts of weights vary with different lenses.
Balls of steel
DISCLAIMER - YOU FLY AT YOUR OWN RISK
The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and bigger lenses will change flight and gimbal characteristics. By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics. This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.