High Quality PETG 3D Printed Lens Adapter

This is an iPhone 16/17 to DL adapter - This adapter uses the DL port on the gimbal, and locks the iphone sleeve into place like a normal lens. The iPhone can then slide into the sleeve, and you can operate the gimbal (pan and tilt) like normal. Requires i3 XL Counter weight kit (sold here)

• This adpter blocks / disables the main camera of the drone, and flying must be done by VLOF, or using the 2nd cam POV.

What’s Included

(1) 3d printed - DL adapter plate DL adapter

(1) 3d printed - iPhone 16/ 17 Sleeve

Functions

• Easy to change vertical or horizontal orientation within seconds.

• Full pan, and tilt.

  *Straight down POV, may induce vibrations due to airflow hitting more surface area of the phone.

Necessary tools and accessories

• XL counter weight for Inspire 3.

Flight Characteristics

• Vibration free flight is not guaranteed. While I have modified this to be pretty smooth, there are still some conditions like high altitudes /high winds / high speeds / sport mode, that may introduce some vibrations.

• Fly very slow and avoid windy conditions or high altitudes (above 8,000ft). Some vibrations are to be expected at certain gimbal tilt angles or various climate conditions. Warmer, high altitude conditions increase propellor speed, thus increases wind vibration.

DISCLAIMER - YOU FLY AT YOUR OWN RISK

The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and larger shaped lenses will change flight and gimbal characteristics.

By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics.

This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.