High Quality PETG 3D Printed Lens Adapter

This is a DJI DL Mount lens Adapter for m42 glass to DJI cameras (inspire 2 &3 ) . This works along with the standard counter weight kit or XL counter weight kit to adapt and use the following lenses on the DJI Inspire 3 (lenses sold separately)

Fly some vintage lenses

• Minolta Lenses

• Helios 44m2

• Jupiter 9 lenses

• Zeiss Carl Zeiss Jena 58mm f2 Biotar

*These are specifically designed for i2 and i3, and NOT intended for R4D and may not fit correctly or fall off under rigorous use on the R4D.

What’s Included

(1) 3d Printed Adapter - M42 to DL

How this works

Step 1. Install lens on Inspire 3 along with the Counter Weight kit and appropriate weights.

Step 2. Set focus to infinity on the ground.

Step 3. Lock focus with a small piece of gaffe tape on the lens. You will not get Autofocus with these lenses.

Step 4. Make sure gimbal lens lock has locked in lens correctly.

Counter weight kit needed to fly

• You will need the Standard or XL Counter Weight Kit

• amounts of weights vary with different lenses.

• Balls of steel

DISCLAIMER - YOU FLY AT YOUR OWN RISK

The DJI inspire 3 is designed to fly compact lenses that are 169g, and flying heavier and bigger lenses will change flight and gimbal characteristics. By purchasing this adapter you accept the risk of personal injury, death and or destruction of property due to the changes to the flight characteristics. This sale makes no guarantee that the lenses the adapter is intended for will work with full functionality, mobility, and aerodynamics. Be smart, fly slow, make a test flight first, YOU FLY AT YOUR OWN RISK.